Short Haul & Long Haul

Trucking

Beelman’s late model truck fleet of over 600 power units consists of low emission equipment designed with state of the art aerodynamics to improve air flow and fuel efficiency. The quality of the fleet guarantees that each delivery gets where it is going, safely and on time. Beelman’s entire fleet is constantly being evaluated and re-designed to improve safety, capacity and efficiency. Tractor and trailer maintenance is performed regularly by trained personnel, using state of the art equipment. Beelman works with manufacturers to build the best equipment possible to specification that enable the movement of our customer’s materials safely, quickly and efficiently. Beelman has the equipment to meet the requirements of your next job.

EQUIPMENT

PNEUMATIC TANKS

High Cube, Mid Cube, Small Cube

High Cube:      Typically used for products 28 pounds per cubic foot or heavier

                        Approximately 1,700 to 1,833 cu/ft tanks

Mid Cube:       Typically used for products 45 pounds per cubic foot or heavier

                        Approximately 1,240 to 1,300 cu/ft tanks

Small Cube:    Typically used for products 55 pounds per cubic foot or heavier

                        Approximately 1,040 cu/ft tanks

  • All pneumatic trailers are bottom drop and can gravity unload.

  • Most pneumatic trailers have automatic lids operated from the ground.

  • All high cube tanks have load bearing legs.

  • Our patented aerodynamic design maximizes safety and efficiency.

 

DUMPS

Standard 39’ General Purpose Aluminum End Dump

  • These trailers are ideal for products less than 5 inch in diameter or a maximum of 20 pounds per piece. 

  • Our truck liners feature superior, steady release of materials and high impact strength.

  • Some trailers are equipped with heat resistance, high performance thermoplastic.

  • All trailers are equipped with electric tarps activated from the cab of the truck.  EPA tarps are also available.

  • Most trailers are equipped with coal chutes.

  • Some trailers have load bearing legs.

  • The aerodynamic, lightweight design maximizes safety and efficiency.

  • 48-56 cu/yd

39’ Aluminum Double Wall, Heavy Duty Aluminum Floors Scrap/ Demolition Trailers

  • These trailers are ideal for hauling products up to 18 inches in diameter or 150 pounds per plate maximum.

  • 45-56 cu/yd

High Cube 39’ Aluminum End Dumps

  • Typically used for hauling products 30 pounds per cubic foot or heavier

  • Some trailers are equipped with barn doors and heavy-duty floors for fork truck loading/ unloading.

  • All trailers have load bearing legs.

  • Some units are utilized to haul bulk commodities one direction and palletized freight on backhauls.

  • 48-56 cu/yd

 

39’ Aluminum End Dump/ Coil Trailers

  • These units are typically utilized to haul bulk commodities one direction and steel or aluminum coils on backhauls.

  • Trailers are equipped with heavy duty floors and tie downs.

  • 48-56 cu/yd

 

 

 

Heavy Duty Commercial Zone Trailers

  • With both aluminum and steel beds, these units are utilized to haul up to 47 tons in commercial zone cities as well as interplant hauling.

  • Some trailers are equipped with barn doors.

  • 43.45 cu/yd

 

 

39’ Frameless Steel End Dumps

  • These units are typically utilized for hauling up to 1500 pound rip rap, plate & structural scrap.

  • Some trailers are equipped with barn doors.

  • 38.76 cu/yd

 

 

26’ Frameless Steel End Dumps

  • These units are typically utilized for hauling up to 1500 pound rip rap, plate & structural scrap.

  • 26.76 cu/yd

 

39’ Steel Side Dumps

  • 34’ Arado steel, round bottom tubs

  • These units are typically utilized for hauling up to a maximum of 1500 pounds of rip rap and various other small aggregates.

  • These units are ideal for hauling dirt.

  • These units can dump street side or curb side and have been utilized to dump rip rap over low highway guardrails.

  • These units are equipped with push bar type bumpers and electric mesh tarps.

  • 38.76 cu/yd

 

 

 

40’-48’ Flat Beds

  • Some trailers are equipped with the Conestoga rolling tarp system.

 

Vans

 

50’ and 53’ Tipper Trailers

  • These units are typically utilized for municipal solid waste, lightweight demolition, and lightweight scrap hauling.

  • 67.56 cu/yd

 

 

Hopper Bottom Trailers

  • All trailers are equipped with electric tarps activated from the cab of the truck.

  • All are gravity unload hopper bottoms.

  • All trailers have load bearing legs.

  • 47.93 cu/yd

Low Boy

High Cube

Mid Cube

Small Cube

DISPATCH

Beelman’s experienced dispatchers, most of them were previous drivers, display the pride they have in their work and guarantee the service that our loyal customer service base have come to know and rely upon.

Dispatch is available 24 hours a day/7 days a week 

4AM Monday - 3PM Saturday
3PM Saturday - 4AM Monday

 

Contact: 618-791-1428
Dumps:  618-646-5325  or  800-541-5918, Ext 5325
Pneumatics:  618-646-5336  or  800-541-5918, Ext 5336 

 
  • Facebook Social Icon

Corporate:  (618) 646-5300

Recruiting:  (618) 646-5316

Sales:  (618) 646-5315

Safety: (618) 646-5352

Dispatch: Dumps (618) 646-5325, Pneumatics (618) 646-5336

1 Racehorse Drive

East St. Louis, IL 62205, USA

©2018 by Beelman Truck Co.